Tile & Grout Cleaning Perth

Enquire Now Southern Cross Cleaning specialises in tile and grout cleaning, and we have done so for many years. We clean and seal tiles and grout in commercial and private offices, buildings, warehouses, schools, medical facilities, caravan parks, universities, shopping centres, supermarkets and sporting complexes.

Southern Cross Cleaning has qualified tile and grout cleaners

using hi-tech cleaning equipment and techniques.

We undertake deep cleaning of tiles and grout in wet areas of toilets, showers, change rooms and kitchens and so on. Tile and grout cleaning is recommended for ongoing maintenance and to improve hygiene and health safety for you employees. This includes stripping and sealing, and the application of sealers and protectors.

We use two different processes for tile and grout cleaning; one being high pressure cleaning and the other being “clean and capture,” which involves using the razorback and hybrid dome.

The first step in our approach to tile and grout cleaning is to identify what process will be the most appropriate one for the job.  We generally use the high-pressure cleaners in wet areas that have suitable drainage, and we use the hybrid in areas that we want to minimise the use of water because there is no, or poor, drainage. 

Using High Pressure Equipment for Tile & Grout Cleaning

We have variety of high-pressure cleaning machines ranging in size from 1500 psi to 4500 psi. Typically, the smaller machines are used for internal use and the larger machines are used for external work. In certain circumstances it is a requirement that, prior to commencing the work, we make sure that fire detection equipment has been isolated. This is to be coordinated with the facilities managers and/or the owners of the building.

Firstly, we ensure we have all of the equipment necessary to undertake and complete the work. Then we place the ‘Wet Floor’ signs and ‘Cleaning in Progress’ signs at all of the entrances to the area where we are working. All furniture, bins, mats, sanitary disposal units and consumables are removed. We then apply the appropriate cleaning solutions to the tile areas; this may include floors, walls, showers, toilets, basins, and urinals. 

It is essential that correct dilution rates are followed, that all staff working on the job are wearing the appropriate PPE, and that MSDS are easily accessible. PPE is to include ear protection, glasses, gloves, suitable waterproof boots and long sleeve shirts and pants. When all tile and grout areas are covered we then agitate the solution with either brushes, the Rotowash, or floor scrubbers. The solution is then left to sit for a short time, after which all areas are high pressure cleaned. 

To finish we squeegee, wet vacuum, and mop the floors dry. All surfaces, mirrors, walls, and partitions are dried and polished, and all furniture and equipment are returned.

Tile and Grout Cleaning using Clean and Capture

The Clean and Capture is very similar to high-pressure cleaning and requires the same pre-start setup, dilution, PPE and safety procedures. The difference is that we need to use the Razorback Extraction machine with the hybrid dome and can only use this machine on tiled floors. The hybrid dome has two enclosed spinning high pressure cleaning jets that blast the tiles and grout. Then, on the edge of the dome, wastewater is immediately extracted to leave no residue or excess water. 

Both techniques achieve similar results on tiled floors in terms of cleanliness, but the great advantage of using the hybrid is that it can be used in dry areas such as kitchens, passages and tiles near carpet because it leaves the floor dry immediately after being cleaned. An added bonus is that we have the ability here to recycle the water and reduce the environmental impact.